VULKAN Group, a Germany company, supports MINING Industry through its VULKAN DRIVE TECH business division, specialized in power transmission solutions: brakes systems, rail clamps, backstops, couplings, as well as driving tailored made solutions. Within the Mining industry, stackers and reclaimers, conveyor belts, mills, crushers, are typical heavy duty machinery whose drives are characterized by shock loads and dynamic displacement of large masses with big inertias. FLUID COUPLINGS for soft starting of the machinery, FLEXIBLE COUPLINGS for speed shaft, SERVICE BRAKES and resilient MOUNTS are typical products used for these applications that are part of VULKAN DRIVE TECH portfolio. Inclined conveyors also require safety equipment in order to maintain the stability of the transported material in emergency conditions. Such situations include failure of the drive train and the resultant rolling back of the belt with a potentially dangerous depositing of the goods at the tail end. All such demanding can be supported by VULKAN DRIVE TECH Solutions.
VULKAN Drive Tech portfolio includes Flexible Couplings, Fluid Couplings, Rigid Couplings, Brake Systems, Clutches, Backstops and Mounts, as well as driving tailored solutions.
At applications such as BELT CONVEYORS, STACKERS AND RECLAIMERS, our FLEXIBLE COUPLINGS are generally installed onto high speed shaft of the drive train and onto low speed shaft, between the gearbox and the pulley. While our BACKSTOPS AND BRAKE SYSTEMS are properly selected to withstand the most critical working conditions to which the conveyor will be subjected to.
And about applications such as CRUSHERS, MILLS, SEPARATORS AND AGITATORS, that are typical heavy duty machinery whose drives are characterized by shock loads and dynamic displacement of large masses with big inertias. FLUID COUPLINGS for soft starting of the machinery, GEAR COUPLINGS for low speed shaft applications and ELECTROHYDRAULIC SERVICE BRAKES are typical products used for these applications.
Torsional flexible coupling that is equipped with an elastic element working in compression. Suitable for motion reversals and multidirectional flexibility.
Applications: Low speed shaft of machinery driven by electric motor and harsh environments.
Nominal Torque Range: 3600 Nm - 644400 Nm
Rotational Speed: 650 RPM - 7000 RPM
Electromagnetic Disc Brake, spring applied and electromagnetic released, each model of brake can be equipped with a variety of accessories to comply with the most demanding applications, including pad wear compensation system, brake status micro switch and pads with worn out sensor.
Applications: Service and parking brakes for high speed shaft applications, such as belt conveyors, cranes, etc.
High speed and low speed backstop with sprag lift off and roller ramps design. Available either with or without radial support bearings and a reaction torque arm.
HIGH SPEED BACKSTOP
Nominal Torque Range: 100 Nm – 42500 Nm
Rotational Speed: 210 RPM - 20000 RPM
LOW SPEED BACKSTOP
Nominal Torque Range: 62 Nm – 578000 Nm
Rotational Speed: 95 RPM - 7000 RPM
BDM - Sales & Engineering
Phone: +27 21 8305314
E-mail: Send message
The NEW V317 Power Supply is smaller, lighter and able to control any DC electromagnetic brake within its maximum current range. V317 current output operates in a closed loop system that allows better performance control and faster response of electromagnetic brakes, making operation safer and more agile. V317 series power supplies are AC/DC drives with a fully digital control system to drive electromagnetic brakes. It is programmable to supply a call current for opening the brake, then an economy current to keep it opened.
SUPPLY: From 3-phase alternating current from grid power or generator unit 220 … 480 V AC +/– 15 % – 50/60 Hz, insensitivity to phase sequence
Available with optional card. MODBUS protocol according to RS232-C standard and RS485 standard.
DISPLAY: Mounted to control board with 2 digit segmented alphanumeric and four LED status indicators.